|
NSW3000-24T1GT1GC-POE-IN |
Hardware Specification |
Ports Type |
24 x 10/100Mbps POE port (RJ45) + 1 x Gigabit port (RJ45) + 1 x Gigabit Combo |
Standards |
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az |
Switching capacity |
8.8 Gbps |
Forwarding performance |
6.55Mpps |
Packet Buffer |
4 M bit |
MAC |
16K |
Weight |
2.9kg |
Dimensions (W×D×H) |
440mm x 244.8mm x 44mm |
Power Supply |
AC 100V to 240V, 50/60Hz |
Max.Power |
385W |
Max.PoE Power |
Maximum total power: 370W |
Maximum PoE power for single port: 30W |
Mode A, 1/2+, 3/6- |
Mode B, 4/5+, 7/8- |
Prior Ports |
1 to 8 |
Cooling Fans |
1 |
Operating temperature |
0 ℃ to 40 ℃ (32 ℉ to 104 ℉) |
Operating humidity |
10%~90% (non-condensing) |
Storage Temperature |
-40 ℃ to 70 ℃ |
Storage Humidity |
5% to 90% RH, noncondensing |
Indicator |
POWER Steady on: AC input is normal, POWER Off: No AC input, PoE Off: No PoE power supply, PoE Steady on: PoE power supply is normal, PoE-MAX off: The POE power supply power of the whole machine is less than 80% of the specification, PoE-MAX Steady on : The POE power supply power of the whole machine is greater than 85% of the specification, LINK/ACT Off: No link, LINK/ACT Steady on: Linked, LINK/ACT Flashing: Transmitting data |
Software Specification |
Ethernet |
Supports full duplex, half duplex, and auto-negotiation working modes. |
Supports port auto-negotiation rate. |
Supports port priority flow control. |
Supports a link aggregation group (consist of two uplink ports) |
Supports port flow statistics |
Supports enabling/disabling ports |
VLAN |
Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4095 |
MAC |
Support (up to 16K). |
Supports clearing the dynamic MAC address |
POE |
Allows to view PoE status and power. |
Allows to enable/disable PoE power supply. |
Loop Detection |
Loop Detection |
QoS |
Supports port rate limitation. |
Supports broadcast storm control. |
System |
Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc. |
Allows to edit and manage the IP address and device name |
Supports single-user management, user authentication, and password modification |
Supports manual time configuration and NTP |
Allows to view other switches information on the same network, up to 32 switches |
Allows to view the connected video devices information, up to 64 devices |
Security |
Supports port isolation (only for the downlink ports). |
Supports locking login IP address, up to 64 addresses can be locked |
Maintenance |
Supports N:1 port mirroring. |
Supports unified software configuration, management, and search. |
Supports discovering the connected video devices and generating a network topology on the software. |
Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software. |