cloud managmend 8-port switch

Model	NSW3000-8T2GT-POE-IN
Ports Type	8 x 10/100Mbps POE port (RJ45) ,
	2 x Gigabit port (RJ45)
Standards	IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at
Switching capacity	5.6 Gbps
Forwarding performance	4.17Mpps
Packet Buffer	2 M bit
MAC	4K
Weight	0.67KG
Dimensions (W×D×H)	169mm*132mm*40mm
Power Supply	AC 100V to 240V, 50/60Hz
Max.Power	130W
Max.PoE Power	Maximum total power: 120W
	Maximum PoE power for single port: 30W
	Mode A, 1/2+, 3/6-
	Mode B, 4/5+, 7/8-
Prior Ports	1 to 2
Cooling Fans	0
Operating temperature	0 ℃ to 40 ℃ (32 ℉ to 104 ℉)
Operating humidity	10%～90% (non-condensing)
Storage Temperature	-40 ℃ to 70 ℃
Storage Humidity	5% to 90% RH, noncondensing
Indicator	POWER Off: No AC input, Power On (Green): Normal power input, Power On (Yellow): The total PoE power is higher than 85% of the total power of the device,
	No PoE Indicator, LINK/ACT Off: No link, LINK/ACT Steady on: Linked, LINK/ACT Flashing: Transmitting data
Software Specification
Ethernet	Supports full duplex, half duplex, and auto-negotiation working modes
	Supports enabling/disabling ports
	Supports port auto-negotiation rate
	Supports port priority flow control.
	Supports port flow statistics
	Supports a link aggregation group (consist of two uplink ports)
VLAN	Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4094
MAC	Support (up to 4K).
	Supports clearing the dynamic MAC address
POE	Allows to view PoE status and power.
	Allows to enable/disable PoE power supply.
Loop Detection	Loop Detection
QoS	Supports port rate limitation.
	Supports broadcast storm control.
Security	Supports port isolation (only for the downlink ports).
	Supports locking login IP address, up to 64 addresses can be locked
Maintenance	Supports N:1 port mirroring.
	Supports unified software configuration, management, and search.
	Supports discovering the connected video devices and generating a network topology on the software.
	Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software.
System	Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc.
	Allows to edit and manage the IP address and device name.
	Supports single-user management, user authentication, and password modification.
	Allows to view other switches information on the same network, up to 32 switches.
	Allows to view the connected video devices information, up to 64 devices .