The PoE Ethernet extender can transmit Ethernet signal and power through one single network cable, which solve the transmission distance limitation of devices as for network camera and so on. The product supports IEEE802.3u 100Base-TX and IEEE802.3 af/at standards. The Max power consumption transmission can up to 30 watts, which can supply 25.4 watts power consumption for terminal devices. The product can extend to 100M and thus the cascading distance can up to 400m after be cascaded for several times. And it can support 100Mbps full duplex transmission mode with good protection ability of anti-ESD and anti-surge. The special design of built-in splicing slot on both sides and magnetic attraction as well as hanger on the bottom enables multiple installation methods of wall mounting, splicing and adsorption. Above all, the product can give a better systematic solution of transmission distance and power supplying for network camera and other device.
PoE In Port: 1* 10/100Base-Tx
PoE Out Port: 1* 10/100Base-Tx
Transmission Media: Cat5e/6
Transmission distance Max:400m
Network standard: IEEE802.3, IEEE802.3u
Delay: <20us PoE Standard: 802.3af/at PsE Type: End-span and Mid-span Power Pin Assignment: 1/2(+), 3/6(-) 4/5(-), 7/8(+) PoE Power Output: 30w Lightning protection: 4KV Execute: IEC61000-4-5 ESD: 6KV Contact discharge, 8KV Air discharge, Execute: IEC61000-4-2 Power Supply: PoE Power Dissipation: <3W Work temperature: -10℃~55℃ Storage temperature: -40℃~85℃ Humidity (Non-condensin): 5%-95% Dimension (L×W×H): 113mm×45.5mm×29mm Weight: 50g EMC/Safety: CE, FCC, ROHS