BDCOM ONU P1004C1

Abiding by IEEE802.3ah, BDCOM P1004C1 ONU meets relevant requirements of GEPON ONU regulated in Technical Requirements of YD/T1475-2006—Ethernet-Based EPON and China Telecom EPON Technical Requirement CTC2.0/2.1. BDCOM P1004C1 ONU is widely applied to the broadcast/electrical bidirectional network, FTTH/FTTO/FTTB.
Supports the symmetric uplink/downlink 1Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Supports to establish a hybrid networking together with OLTs of mainstream manufacturers, minimizing the cost for the carrier to establish its network.
Supports SLA and DBA.
Occupies little space and consumes a little volume of power.
4 10/100M TX, 1 PON

Authorize or call

SKU: 560271. Category: .
Brand Name: .

Product Description

• User interface 4 ports Ethernet 10/100 Base-T, RJ-45
• PON interface Symmetric transfer rate 1 Gbit / s
• Network diameter: 30 km
• Type optical interface: SC / PC
• Optical receiver sensitivity: better than -26 dBm
• Optical power of the transmitter: 2 – 7 dBm
• Security: authentication mechanism ONU
• Standrts IEEE 802.3ah
• PRC Community Industry Standard (YD/T 1475-2006)
• IEEE 802.1D, Spanning Tree
• IEEE 802.1Q, VLAN
• IEEE 802.1w, RSTP
• Ethernet – II, Ethernet-SNAP
• VLAN VLAN on port base
• IEEE 802.1Q VLAN
• QoS Flow control back pressure (half duplex)
• Flow control IEEE 802.3x (full duplex)
• HOL blocking prevention mechanism
• IEEE P802.1p, CoS
• Four queues per port transfer correspond to the eight 802.1p priority
• WR, SP and FIFO
• Rate control
• Reliability Unidirectional Link Detection (UDLD)
• Support functions Dying-Gasp
• Network Security IEEE 802.1x authentication
• Limit the number of users per port
• Port security
• Storm control packets
• Control CLI, SNMP, Telnet
• Software upgrade via TFTP and FTP
• Logging locally or on a server Syslog
• Network testing tools: ping, traceroute
• Physical dimensions 170 mm x 98 mm x 28 mm
• Cooling
• The heat generated by the device during continuous operation (24 hours),
• can result in poor performance and strain components
• Environmental Requirements Operating temperature: 0 – 60°С
• Relative Humidity: 10 – 85%, non-condens
• Storage Temperature -40 – 80°С
• Relative Humidity 5 – 95%, non-condensing
• Power Type of adapter on/off adapter
• Nominal input voltage: ~110 – 240V, 50/60 Hz
• Fluctuations of input voltage: ± 20% (female), ± 10% (ext.)
• Power consumption: 10 W