WP-571E

Active Wall Plate – HDMI over Twisted Pair Transmitter – DGKat.
The WP-571 is a DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572.

Authorize or call

SKU: 791284. Category: .
Brand Name: .

Product Description

System Range – Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.

Cable – Requires shielded twisted pair (STP) cable. For optimum range and performance use Kramer’s BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

INPUTS: 1 HDMI connector.
OUTPUTS: 1 DGKat™ twisted pair on a RJ−45 connector.
BANDWIDTH: Up to 4.95Gbps data rate (1.65Gbps per graphics channel).
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
POWER CONSUMPTION: US: 12V DC, 190mA (single device); 360mA total (when one device supplies the power to both devices). UK, BG: 12V DC, 150mA (single device); 310mA total (when one device supplies the power to both devices).
DIMENSIONS: US: 3.3cm x 3.6cm x 10.4cm (1.3″ x 1.42″ x 4.1″) W, D, H;
UK: 8.63cm x 4.5cm x 8.63cm (3.4″ x 1.77″ x 3.4″) W, D, H;
BG: 8.04cm x 4.5cm x 8.04cm (3.17″ x 1.77″ x 3.17″) W, D, H.
WEIGHT: 0.08kg (0.18lbs).
INCLUDED ACCESSORIES: Power supply.